What to do if the interface screen doesn't display correctly on my LG TV?
If the entire interface screen is not displaying correctly on your LG TV, the suggested solution is to check the interface signal condition.
What to do if the high tension output VSC signal doesn't come out on my LG TV?
If the high tension output VSC signal is not present in your LG TV, the suggested solution is to check the VSC low voltage output circuit.
What to do if the VSC low pressure output doesn't come out on my LG TV?
If the VSC low pressure output is not present in your LG TV, check the Y B/D Module output circuit.
What to do if the VSC signal RL-ON doesn't come out on my LG TV?
If the VSC signal RL-ON is not present in your LG TV, check the VSC Vs-ON.
General| Comb filter | 2D |
|---|---|
| Pixel pitch | 0 mm |
| Aspect ratio | 16:9 |
| Audio system | SRS TruSurround XT |
| Certification | RoHS, UL |
| Product color | Black |
| Response time | 0.001 ms |
| Package weight | 35000 g |
| Noise reduction | Yes |
| RMS rated power | 20 W |
| Display diagonal | 42 \ |
| Depth (with stand) | 308 mm |
| Display brightness | 1500 cd/m² |
| Display resolution | 1024 x 768 pixels |
| Display technology | Plasma |
| Power requirements | 100-240V, 50/60 Hz |
| Width (with stand) | 1040 mm |
| HDMI ports quantity | 3 |
| Height (with stand) | 727.1 mm |
| Weight (with stand) | 28500 g |
| SCART ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 1 |
| Contrast ratio (typical) | - |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 310 W |
To Next Page
