To Next PageTo Next Page
Need help?Do you have a question about the LG 42PG6000 and is the answer not in the manual?
General| Depth | 680.6 mm |
|---|---|
| Height | 79.6 mm |
| Weight | 25000 g |
| Equalizer | Yes |
| Certification | RoHS, UL |
| Product color | Black |
| RMS rated power | 20 W |
| Display diagonal | 42 \ |
| Depth (with stand) | 735.4 mm |
| Display brightness | 1500 cd/m² |
| Display resolution | 1024 x 768 pixels |
| Display technology | Plasma |
| Power requirements | 100-240V, 50 - 60 Hz |
| Width (with stand) | 1044 mm |
| HDMI ports quantity | 4 |
| Height (with stand) | 308 mm |
| Weight (with stand) | 27800 g |
| SCART ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Viewable size diagonal | 1070 mm |
| S-Video inputs quantity | 1 |
| Contrast ratio (typical) | - |
| Display viewable area (HxV) | 922 x 520 mm |
Critical warnings and essential safety parts replacement guidelines.
Advice on isolation transformers, fuse replacement, and handling high-voltage parts.
Procedures for performing hot and cold leakage current tests.
Defines the TV models and geographical markets covered by the specifications.
Details operating conditions, input voltage, and general TV characteristics.
Outlines the methods used for performance, safety, and EMC testing.
Covers broadcasting systems, Tuner, Scart, Video, S-Video, Component, RGB, HDMI, Audio, SPDIF, and USB interfaces.
Defines the scope of adjustments and provides essential notes for service technicians.
Details procedures for S/W auto download and manual model name download via USB.
Explains the automated adjustment sequence using RS-232C communication.
Guides on performing manual Analog-to-Digital Converter adjustments and EDID data management.
Describes the method for checking PCMCIA card functionality.
Step-by-step guide for adjusting Va and Vs voltages on the power board.
Details required equipment and color temperature standards for white balance calibration.
Explains the connection for auto white balance measurement and control procedures.
Details the adjustment map and parameters for white balance control (R Gain, G Gain, B Gain).
Covers inputting shipping option data and checking set information like serial number.
Describes the procedure for setting factory shipment mode using the remote controller.
Outlines the steps for downloading firmware files using the 'LG Term' software.
A comprehensive flowchart for diagnosing power board related issues based on voltage output states.
Illustrates the pin layout and specifies the connections for AC inlet, PDP module, and VSC board.
Identifies symptoms of no power and guides through checking power cord, AC inlet, fuses, and cables.
Describes symptoms of protect mode and outlines checks for power board, connectors, fuses, and board outputs.
Details symptoms of no raster and guides through checking module discharge, VAVS, LVDS cable, and VSC board.
Addresses issues where the On-Screen Display (OSD) is not shown, checking LVDS cable, VSC board, and Ctrl board.
Guides on diagnosing display problems for RF, S-Video, AV, Component, RGB, HDMI, and SCART inputs.
Identifies symptoms of no sound and guides checks for speaker settings, cables, tuner, and audio amplifier IC.
Overview of the main functional blocks and signal flow within the TV system.
Details SCART, Component, RGB, HDMI, and other interface signal connections.
Depicts block diagrams for Tuner, PCMCIA, Audio, USB, and control signal interfaces.
Illustrates reset control, I2C communication, and power voltage distribution across system components.
Provides a visual exploded view of the TV assembly with part numbers and a critical safety notice.
