87
SOUND & LANGUAGE CONTROL
STEREO RECEPTION (IN ANALOGUE MODE ONLY)
AA
MMoonnoo ssoouunndd sseelleeccttiioonn
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved. To switch back to stereo.
BBrrooaaddccaasstt
Mono
Stereo
OOnn SSccrreeeenn DDiissppllaayy
MMOONNOO
MMOONNOO // SSTTEERREEOO
When a programme is selected, the sound information for the station appears with the programme number
and station name.
Select
AAuuddiioo
.
Selects the sound output.
1
SPEAKER SOUND OUTPUT SELECTION
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
LL++RR::
Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is
sent to the right loudspeaker.
LL++LL::
Audio signal from audio L input is sent to left and right loudspeakers.
RR++RR::
Audio signal from audio R input is sent to left and right loudspeakers.
To Next Page
Loading...
Need help?
General
