81
August 2010 42PJ350 Plasma
Diode Mode Readings taken with all connectors Disconnected. DVM in Diode Mode.
Connector P1 to Control P102 Voltages and Diode Checks
Connector P1 to Control P102 Voltages and Diode Checks
Voltage and Diode Mode Measurements
P1 Location:
Bottom Left hand side
Pin 1
There are no Stand-By voltages on this connector
P1 "Z-SUS Board" to "Control" P102
1.9V18.24V+15V12
1.9V18.24V+15V11
Open5V+5V10
Open5V+5V9
GndGndGnd8
2.82V0.15VZSUS_UP7
2.82V0.86VZSUS_DN6
2.82V0.1VER_UP5
GndGndGnd4
2.82V1.9VZ_BIAS3
Open0.0VY-OE2
GndGndGnd1
Diode CheckRun LabelPin