13
* The voice recognition may fail when you speak too
fast or too slowly.
* The recognition rate may vary depending upon
the user’s characteristics (voice, pronunciation,
intonation, and speed) and the environment (noise
and TV volume).
Color buttons These access special functions in some
menus. (
Red, Green, Yellow, Blue)
B
B
Adjusts the volume level.
Displays the Screen Remote.
* Accesses the Universal Control Menu in some regions.
* Pressing and holding the button will display a
menu to select an external device that is connected to
the TV.
Used for viewing 3D video. (For 3D models)
(MUTE) Mutes all sounds.
Scrolls through the saved channels.
Registering Magic Remote
The Magic Remote operates by pairing with your TV.
How to register the Magic Remote
(Wheel)
To use the Magic Remote, first pair it with your
TV.
1 Put batteries into the Magic Remote and turn
the TV on.
2 Point the Magic Remote at your TV and press
the Wheel (OK) on the remote control.
* If the TV fails to register the Magic Remote,
try again after turning the TV off and back on.
How to deregister the Magic Remote
(BACK)
(Home)
Press the (BACK) and (Home) at the
same time, for five seconds, to unpair the
Magic Remote with your TV.
Pressing and holding the
(EXIT to LIVE)
button will let you cancel and re-register
Magic Remote at once.
How to use Magic Remote
Shake the Magic Remote slightly to the
right and left or press (Home), ,
buttons to make the pointer appear
on the screen. (In some TV models, the
pointer will appear when you turn the
Wheel button.)
If the pointer has not been used for a
certain period of time or Magic Remote
is placed on a flat surface, then the
pointer will disappear.
If the pointer does not move as you
wish, shake Magic Remote to the left
and right. The pointer will move to the
center of the screen.
The Magic Remote depletes batteries
faster than a normal remote due to the
additional features.
Precautions to Take when Using the
Magic Remote
Use the Magic remote within the maximum
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the Magic remote.
The Magic remote may be damaged or may
malfunction if it is dropped or receives a heavy
impact.
Take care not to bump into nearby furniture or
other people when using the Magic remote.
Manufacturer and installer cannot provide
service related to human safety as the applicable
wireless device has possibility of electric wave
interference.
It is recommended that an Access Point (AP) be
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic remote
may not perform as expected due to frequency
interference.
To Next Page
Loading...
Need help?
General
