8
Power
General Power
Power-related feature settings
No Signal Power Off(15 min.)
Set whether to use the 15 Min Auto Off feature.
• You can set this option to On or Off.
• If you set this feature to On, the product turns off when it has remained in No Signal status for 15 minutes.
• If you set this feature to Off, the 15 Min Force Off feature is disabled.
• It is recommended that you set this feature to Off if you intend to use the product for long periods of time as the
feature turns the power of the product off.
No IR Power Off
Set whether to use the No IR Power Off feature.
• You can set this option to Off, 2 hours, 4 hours, 6 hours, or 8 hours.
• If you set this feature to 2 hours, 4 hours, 6 hours or 8 hours, the product turns off if there is no input from the
remote control for the corresponding period.
• If you set this feature to Off, the No IR Power Off feature is disabled.
DPM
Set the Display Power Management (DPM) mode.
• If this feature is not set to Off, the monitor will enter DPM mode when there is no input signal.
• If you set this feature to Off, DPM is disabled.
• You can set this feature to Off, 5 sec. or 10 sec..
DPM Wake Up Control
Set conditions for releasing the DPM status according to the digital signal processing of the connected DVI/HDMI port.
• When set to Clock, the set checks for digital clock signals and releases the DPM status once it finds the clock signal.
• When set to Clock+DATA, the set releases the DPM status when both the clock signal and data of the digital signal
are entered.
• This feature may not be available for all models.
To Next Page
Loading...
