LG 43SL5E - Reset to Initial Settings; Ez Download; Factory Reset

ENGLISH
24
IR Operation Lock
• If you set this feature to Off (Normal), you can use your remote control.
• If you set this feature to On (Power Key Only), you can only use the power key.
• If you set this feature to On (Block All), you cannot use your remote control.
Local Key Lock
• This feature enables you to configure the Local Key Operation Lock feature so that settings or content cannot be
changed.
• If you set this feature to Off (Normal), you can use the local keys on the monitor.
• If you set this feature to On (Power Key Only), you can only use the power key.
• If you set this feature to On (Block All), you cannot use the local keys.
NOTE
• If IR Operation Lock and Local Key Operation Lock are both set to On (Block All), General > Power > Power On Status
value switches to ‘PWR.’ Changing this value is not impossible to ensure the correct powering on operation. (To
prevent mistakes by the user)
• If IR Operation Lock is set to On (Power Key Only, Block All), you can go to the menu screen by pressing and holding
the Settings key for more than 5 seconds and entering the password.
Reset to Initial Settings
Admin Reset to Initial Settings
This feature resets all items except the Quick Start items (Language, Time, and Auto Power Off) to their initial settings.
Ez Download
Admin Ez Download
Users can easily download Software Update, Logo Image, No Signal Image, Data Cloning and etc. from Ez Download.
Factory Reset
Admin Factory Reset
This feature resets the items applicable for Reset to Initial Settings, Date, Time, Language, Network IP, and the Input
Label Internal Storage files.
However, Calibration mode's RGB gain is an exception.