20
Expert Controls
Display Expert Controls
Energy Saving
• Smart Energy Saving: Automatically adjust the brightness of the screen according to the brightness of the picture to
save energy.
- On: Enable the Smart Energy Saving feature.
- Off: Disable the Smart Energy Saving feature.
• Brightness Control: Adjust the brightness of the screen to save energy.
- Off: Disable the Brightness Control function.
- Minimum/Medium/Maximum: Use energy saving according to the energy saving level set for the monitor.
- Screen Off: Turn off the screen after 3 seconds.
• Brightness Scheduling: Adjust the backlight at specified times.
- You can set this feature to On/Off.
- Add schedule by setting the schedule time and backlight value.
- If the current time has not been set, Brightness Scheduling is disabled.
- You can add up to six schedules, and they are sorted in ascending order by time.
- You can delete a schedule by selecting it from the list and pressing the OK button.
Adjust (RGB-PC)
This feature enables you to configure the PC display options in RGB mode.
• Auto Config.: Automatically adjust the screen position, time, and phase. The image displayed on the screen can be
unstable for a few seconds in the process of the configuration.
• Resolution: Choose between 1024 x 768, 1280 x 768 and 1360 x 768 resolution.
• Position/Size/Phase: Adjust the options when the picture is not clear, especially when characters are shaky, after the
auto configuration.
• Reset to Initial Settings: Resets the options to default.
• This feature may not be available for all models.
To Next Page
Loading...
