14
Start Time
• This option is available only when Timer is set to Schedule.
• Sets the start time of the ISM function.
• This feature may not be available for all models.
End Time
• This option is available only when Timer is set to Schedule.
• Sets the end time of the ISM function.
• This feature may not be available for all models.
How to Download an ISM Bar Image in Ez Download
1 In order to download an image in Ez Download, there must be an image file in an ‘ism_bar’ or ‘ISM_BAR’ folder on
your USB storage device.
2 Delete the existing content stored on the internal memory before downloading a new image file.
3 Add [ISMBAR] as a prefix to the name of a file to distinguish the file from others (EPK, Logo, No Signal, etc.).
4 Download ISM photos or movies in Ez Download.
NOTE
• You can download multiple images up to 5 MB in total.
• The total bit size of images must be under 50 MB for the images to be downloaded.
For example, in the case of a 500 KB image with a resolution of 1920 x 1080, its bit size calculated by image
decoding is about 7.91 MB (1920 * 1080 * 32 bit/1024/1024/8). Therefore, if you download 7 images of the same
size, the total size of the images is about 3.5 MB, which falls within 5 MB. However, their total bit size is 7.91 MB * 7
= 55.3 MB, which exceeds the maximum bit size of 50 MB, so they cannot be downloaded.
How to Download an ISM Photo/Movie in Ez Download
1 In order to download a user image in Ez Download, there must be an user image file in an “ism or ISM” folder on
your USB storage device.
2 Delete the existing content stored on the internal memory before downloading a new image file.
3 Add [ISMPHO] as a prefix to the name of a file for photos or [ISMMOV] if the file contains movies to distinguish the
file from others (EPK, Logo, No Signal, etc).
4 Download ISM photos or movies in Ez Download.
To Next Page
Loading...
