16
Input Manager
Specify a label for each input source.
SIMPLINK Setup
• When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage.
• Device ID: Set the ID of the device connected via CEC wiring. You can choose a value between All and E.
• Standby: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
Transmission Reception
All O O
Send Only O X
Receive Only X O
Off X X
Crestron
• This function enables synchronization with applications provided by Crestron.
• Server: This menu sets the server's IP address for the network connection with the server (equipment provided by
Crestron).
• Port (1024~65535): This menu sets the port for the network connection with the server. The default port number
is 41794.
• IP ID (3~254): This menu sets a unique ID for synchronizing with the application.
To Next Page
