- 20 -
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
5.10. Motion Remote controller Inspection
5.10.1. Equipment
Motion remote controller for test, IR-KEY-CODE remote
controller for test
Check battery before test. (Recommend : Change battery for
every Lot.)
5.10.2. Process
1) Push “Mute” or “ START” key for pairing between TV-set and
motion remote controller.
2) Push “OK” or “Enter” key, you can see the Cursor on screen.
3) Push “Vol+” or “STOP” key, Disconnect Pairing.
5.11. 3D Function test (EXCEPT : LS5700)
5.11.1. Equipment
Pattern Generator MSPG-3233, HDMI mode 37, pattern No. 81
5.11.2. Equipment
1) Connect HDMI (HDMI mode 371, Pattern No. 81)
2) Insert 3D Mode, Select side by side mode.
3) Without 3D-glasses, Like below gure.
4) With 3D left-glass, Like below gure. (Center is RED)
5) With 3Dright-glass, Like below gure.(Center is Blue)
To Next Page
Loading...
