To Next PageTo Next Page
Need help?Do you have a question about the LG 47LM670S-ZA and is the answer not in the manual?
Essential safety parts should be replaced with same components to prevent hazards.
General guidance for safe servicing, including unplugging before work.
Techniques to reduce component damage from static electricity.
Proper soldering techniques for electronic components.
Specifies the chassis the manual applies to.
Conditions and parameters for testing TV components and performance.
Methods for testing performance, safety, and EMC compliance.
Details market specifications and supported countries/standards.
Lists supported analog and digital broadcasting standards.
Details analog and digital receiving system specifications and modulations.
Lists the four HDMI inputs and their support for HDCP.
Lists the three USB ports and supported file formats.
Specifies the TV models and chassis the instructions apply to.
Notes about servicing conditions and precautions.
Explains the purpose of ADC adjustment for black level and gain.
Procedures for downloading MAC, CI+, Widevine, and ESN keys.
Details LAN connectivity and inspection.
Details steps for inspecting LAN connection and settings.
Procedure for performing a LAN port ping test.
Procedure for downloading model and serial numbers via RS232.
How to check the CI+ key value via Instart menu and RS232.
How to check the WiFi MAC address using RS232 or Instart menu.
Covers manual adjustment procedures.
Explanation of EDID/DDC for Plug and Play functionality.
Details the automatic and manual methods for white balance adjustment.
Step-by-step methods for performing white balance adjustment.
Steps to check the Eye-Q function using the remote control.
Steps to verify the functionality of the local dimming feature.
Procedure for testing the Magic Motion remote control.
Instructions for testing the 3D functionality with specific patterns.
Steps to test the Wi-Fi connection and network detection.
How to check LNB voltage and 22KHz tone for DVB-S/S2 models.
Preparation and steps for auto-checking GND and internal pressure.
Options related to the MICOM model configuration.
Options and settings related to the eye sensor.
Connector details for commercial audio output.
Lists key features of the EPI interface.
Highlights the advantages of the EPI interface.
Compares HF mini-LVDS with EPI interface features and capabilities.
Shows the evolution from mini-LVDS to EPI for LCM.
Block diagram of the IR and soft touch PCB.
Specifies voltage tolerances for key inputs.
Details the pin assignments for the IR/soft touch PCB connector.
Describes the LED lighting scenarios for different conditions and models.
Specifies touch key threshold levels and how to read touch data.
Guide for adjusting touch sensitivity.
Pinout details for the WiFi module's USB interface.
Block diagram of the WiFi built-in assembly.
Explains Widevine as a solution for adaptive streaming and DRM.
Discusses HDCP 2.0 and its role in Netflix services.
Defines DTCP as a cryptographic protocol for content protection.
Visual examples of T-Con board defects and their causes.
Visual examples of T-Con board defects, including abnormal power and display issues.
Identifies cases where the panel module cannot be repaired and needs replacement.
Identifies cases where the panel module cannot be repaired and needs replacement.
Identifies conditions requiring VCOM adjustment (module/T-con change).
Lists the service remote controller as required equipment.
Step-by-step procedure for adjusting VCOM value using the remote.
General
