To Next PageTo Next PageWhy does my LG 48842 have an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can occur for several reasons: the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are in the drum.
Why does my LG Washer show an imbalance error?
If your LG Washer displays an imbalance error, it could be due to several reasons. First, the load might be too small; try adjusting the load size. Second, the appliance may be tilted; ensure the washer is level. Also, laundry gathered to one side can cause this issue; redistribute the laundry evenly. Finally, non-distributable items in the drum can lead to imbalance; remove such items.
Why does my LG Washing machine show an imbalance error?
An imbalance error in your LG washing machine can occur for several reasons: * The load is too small. * The appliance is tilted. * Laundry is gathered to one side. * Non-distributable items are in the drum.
Why is my LG Washing machine showing a DRAIN ERROR?
A DRAIN ERROR on your LG washing machine indicates that the machine did not fully drain within 10 minutes.
How to troubleshoot a locked motor error on my LG 48842?
A locked motor error on your LG Washer could stem from several issues: 1. The motor harness might not be properly connected to the stator assembly; ensure these are correctly connected. 2. The electrical contact between the motor harness and the main PWB assembly might be unstable; check and secure these connections. 3. The motor harness between the stator assembly and main PWB assembly might be cut; repair the motor harness. 4. The hall sensor could be defective; consider replacing it.
What does a water inlet error mean on my LG 48842?
A water inlet error on your LG Washer means that the correct water level isn't reached within the specified time. Ensure that you have correct water level settings.
Why does my LG 48842 show a WATER INLET ERROR?
A WATER INLET ERROR on your LG Washer means that the correct water level (2 level) was not reached within 8 minutes after water was supplied, or the preset water level was not reached within 25 minutes.
What to do if my LG 48842 Washer shows a door open error?
If you're getting a door open error on your LG Washer, make sure the door is fully closed and securely latched. Also, check the electrical connections at the door switch and PWB assembly to ensure they are not loose. If the problem persists, the DOOR SWITCH ASSEMBLY might be faulty and require replacement.
What causes an over current error in my LG Washer?
An over current error on your LG Washer can be caused by two main issues. First, the MAIN PWB ASSEMBLY might be out of order and need replacement. Second, the winding in the STATOR ASSEMBLY could be short-circuited, requiring you to check the STATOR ASSEMBLY winding.
What to do if I see a pressure sensor error on my LG 48842 Washer?
A pressure sensor error on your LG Washer indicates that the SENSOR SWITCH ASSEMBLY is out of order. The suggested solution is to replace the SENSOR SWITCH ASSEMBLY.
General
