To Next Page
A
Angela PenaAug 15, 2025
What does DRAIN ERROR mean on my LG WM1814CW?
- MMolly LyonsAug 15, 2025
A DRAIN ERROR on your LG Washer means that the washer has not fully drained within 10 minutes.
What does DRAIN ERROR mean on my LG WM1814CW?
A DRAIN ERROR on your LG Washer means that the washer has not fully drained within 10 minutes.
What causes a LOCKED MOTOR ERROR on my LG WM1814CW Washer?
A LOCKED MOTOR ERROR on your LG Washer can occur due to several reasons: the connector (3-pin, male, white) in the MOTOR HARNESS is not connected to the connector (3-pin, female, white) of STATOR ASSEMBLY; the electric contact between the connectors (3-pin, male, white) in the MOTOR HARNESS and 4-pin, female, white connector in the MAIN PWB ASSEMBLY is bad or unstable; the MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open circuited); or the hall sensor is out of order/defective.
Why does my LG WM1814CW Washer show an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can occur if the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are placed in the drum.
What causes a DOOR OPEN ERROR on my LG Washer?
A DOOR OPEN ERROR on your LG Washer can be caused by several factors: the door not being completely closed, loose electrical connections at the door switch and PWB assembly, or a malfunctioning DOOR SWITCH ASSEMBLY.
What does WATER INLET ERROR mean on my LG WM1814CW Washer?
A WATER INLET ERROR on your LG Washer indicates that the correct water level (246) was not reached within 8 minutes after water was supplied, or it did not reach the preset water level within 25 minutes.
What does PRESSURE SENSOR ERROR mean on my LG Washer?
A PRESSURE SENSOR ERROR on your LG Washer indicates that the SENSOR SWITCH ASSEMBLY is out of order.
What does THERMISTOR ERROR mean on my LG WM1814CW?
A THERMISTOR ERROR on your LG Washer means that the THERMISTOR is out of order.
What causes a BALL SENSOR ERROR on my LG Washer?
A BALL SENSOR ERROR on your LG Washer is caused by a loose Ball Sensor Connector or a Ball Sensor that is out of order.
Why does my LG Washer show a POWER FAILURE error?
A POWER FAILURE error on your LG Washer indicates that the washer experienced a power failure.
What does EEPROM ERROR mean on my LG WM1814CW?
An EEPROM ERROR on your LG Washer means that the EEPROM is out of order.
General| Type | Front Load |
|---|---|
| Energy Star Certified | Yes |
| Spin Speed | 1, 200 RPM |
| Color | White |
| Wash Cycles | 10 |
| Steam Washer | Yes |
Highlights major features like Direct Drive System, Tilted Drum, and Time-Released Dispenser.
Explains Neuro Fuzzy logic, water level sensing, and door locking mechanisms.
Details door access conditions, indicator lights, and child lock activation.
Identifies main parts of the washing machine and lists included accessories.
Covers removing shipping bolts, leveling the appliance, and connecting water/drain hoses.
Describes the main display, status indicators, and key buttons like POWER, START/PAUSE, and CYCLE SELECTOR.
Explains the specific functions of OPTION, WASH/RINSE, SPIN SPEED, and SOIL LEVEL buttons.
Guidelines before servicing, QC test mode, and checking water level frequency.
Lists common error codes, their symptoms, and potential causes for the washing machine.
Flowcharts for diagnosing common issues like no power, water inlet, or drain problems.
Step-by-step guides for diagnosing faults like no power, vibration, or spin issues.
Steps to remove control panel, drawer, and dispenser assembly.
Procedures for removing the cabinet cover, door, and pump.
Guide to disassembling thermistor, ball sensor, motor, and damper.
Diagram showing the exploded view of the cabinet and control panel parts.
Diagram illustrating the exploded view of the drum and tub components.
Diagram showing the exploded view of the detergent dispenser assembly.
