What does FF FROZEN ERROR mean on LG Washer?
The FF FROZEN ERROR on your LG washer means that the inlet hose, drain hose, or drain pump is frozen. Refer to the 'Care in Cold Climates' section for guidance.
What to do if my LG Washer shows an IE INLET ERROR?
If your LG Washer displays an IE INLET ERROR, ensure the water supply faucets are fully open. Also, check that the water inlet hoses are not kinked, pinched, or crushed behind or under the washer. Be cautious when moving the washer during cleaning or maintenance. Clean the inlet filters as described in the MAINTENANCE section. Verify that your household water pressure is adequate by checking another faucet. If the flow is low, consider contacting a plumber to repair the water supply lines. Disconnect the water inlet hoses from the washer and run a few gallons of water through the hoses to flush out any dirt. Finally, avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
How to fix an LG WM1455HVA that will not turn on?
If your LG washer won't turn on, start by ensuring the power cord is properly plugged into a grounded outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary.
How to fix UE UNBALANCE ERROR on LG WM1455HVA Washer?
If you're getting a UE UNBALANCE ERROR on your LG washer, it means the load is unbalanced. Try these solutions: if the load is too small, add additional items to help balance it. If you're washing heavy items with lighter ones, separate them into similar weight categories. If the items are tangled, manually redistribute them in the drum.
Why is my LG WM1455HVA Washer making a squeaking noise?
If your LG washer is making a squeaking noise, packaging materials were not removed. Refer to 'Unpacking and Removing shipping Material' in the INSTALLATION section.
What does dHE DRY ERROR mean on LG WM1455HVA Washer?
The dHE DRY ERROR on your LG washer indicates that the dryer function is not working (on washer/dryer combination models). Call for service.
What does FE OVERFLOW ERROR mean on LG Washer?
The FE OVERFLOW ERROR on your LG washer indicates that the water level is too high, likely due to a faulty water valve. Close the water faucets, unplug the washer, and call for service.
How to fix dE, dE1, dEz, dE4 DOOR OPEN ERROR on LG WM1455HVA Washer?
If your LG washer is showing a dE, dE1, dEz, or dE4 DOOR OPEN ERROR, it means the door isn't properly secured. Make sure to close and secure the door.
How to stop my LG Washer from making loud banging noises when filling?
The loud banging noises occurring while your LG washer fills with water are related to your home's plumbing. To resolve this, install a water hammer arrestor.
How to disable CL CONTROL LOCK FUNCTION on LG WM1455HVA?
The CL CONTROL LOCK FUNCTION on your LG washer is on to prevent changes to cycles or operation. Turn off the Control Lock function in the control panel.
General| Style | front load; electric; compact front load washer |
|---|---|
| Color | graphite steel |
| Washer Capacity | 2.4 cu. ft. |
| Max Spin Speed | 1, 400 |
| Spin Speeds | 5 |
| Number of Cycles | 14 (normal, heavy duty, bulky/large, sanitary, baby wear, allergienetm, tub clean, delicates, hand wash/wool, perm. press, sportswear, speed wash, drain+spin, downloaded) |
| Number of Options | 9 (heavy soil, extra rinse, pre-wash, delay wash, wi-fi, add item, remote start, signal, control lock) |
| Temperature Settings | extra hot, hot, warm, cold, tap cold; 5 |
| Water Levels | load sensing |
| Soil Levels | 2 |
| Internal Heater | yes |
| Control Panel | digital and knobs; plastic |
| Child Lock | yes |
| Cycle Signal | yes |
| Interior Light | no |
| Steam | yes |
| LoadSense | yes |
| Add Wash | yes |
| Soak Settings | no |
| Remote Control | yes |
| Wi-Fi | yes |
| Electrical Requirements | 120v, 10 amps |
| Voltage | 120 volts |
| Current | 10 |
Weight and Dimensions| Dimensions | 24" x 33 1/2" x 22 1/4" |
|---|---|
| Depth | 22 1/4 inch |
| Height | 33 1/2 inch |
| Width | 24 inch |
| Net Weight | 154.3 lbs |
To Next Page
