W
Whitney KelleySep 12, 2025
What does LE MOTOR LOCKED ERROR mean on LG Washer?
- CChristopher CampbellSep 13, 2025
The LE MOTOR LOCKED ERROR on your LG washer indicates a motor error. Allow the washer to stand for 30 minutes, then restart the cycle.
To Next PageTo Next PageWhat does LE MOTOR LOCKED ERROR mean on LG Washer?
The LE MOTOR LOCKED ERROR on your LG washer indicates a motor error. Allow the washer to stand for 30 minutes, then restart the cycle.
What to do if my LG WM1455HPA Washer shows an IE INLET ERROR?
If your LG Washer displays an IE INLET ERROR, ensure the water supply faucets are fully open. Also, check that the water inlet hoses are not kinked, pinched, or crushed behind or under the washer. Be cautious when moving the washer during cleaning or maintenance. Clean the inlet filters as described in the MAINTENANCE section. Verify that your household water pressure is adequate by checking another faucet. If the flow is low, consider contacting a plumber to repair the water supply lines. Disconnect the water inlet hoses from the washer and run a few gallons of water through the hoses to flush out any dirt. Finally, avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
How to fix an LG Washer that will not turn on?
If your LG washer won't turn on, start by ensuring the power cord is properly plugged into a grounded outlet. Also, check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary.
How to fix UE UNBALANCE ERROR on LG WM1455HPA Washer?
If you're getting a UE UNBALANCE ERROR on your LG washer, it means the load is unbalanced. Try these solutions: if the load is too small, add additional items to help balance it. If you're washing heavy items with lighter ones, separate them into similar weight categories. If the items are tangled, manually redistribute them in the drum.
Why is my LG WM1455HPA Washer leaking water?
If your LG washer is leaking water, inspect the hoses and connectors for any leaks, cracks, or splits. If the house drain pipes are clogged, contact a plumber. Ensure the drain hose is properly inserted into the drain connector and is secured to prevent it from coming out during the drain cycle. Also, reduce the amount of detergent used, especially for small or lightly soiled loads, as excessive sudsing can cause leaks.
Why is my LG WM1455HPA making loud banging noises when filling with water?
If your LG washer makes loud banging noises while filling with water, it's likely a plumbing issue in your home. Consider installing water hammer arrestors.
What does FE OVERFLOW ERROR mean on LG WM1455HPA?
The FE OVERFLOW ERROR on your LG washer indicates that the water level is too high, likely due to a faulty water valve. Close the water faucets, unplug the washer, and call for service.
How to fix dE, dE1, dEz, dE4 DOOR OPEN ERROR on LG Washer?
If your LG washer is showing a dE, dE1, dEz, or dE4 DOOR OPEN ERROR, it means the door isn't properly secured. Make sure to close and secure the door.
How to stop my LG WM1455HPA from making loud banging noises when filling?
The loud banging noises occurring while your LG washer fills with water are related to your home's plumbing. To resolve this, install a water hammer arrestor.
How to disable CL CONTROL LOCK FUNCTION on LG WM1455HPA Washer?
The CL CONTROL LOCK FUNCTION on your LG washer is on to prevent changes to cycles or operation. Turn off the Control Lock function in the control panel.
General
