To Next Page
K
Kevin SmithAug 15, 2025
What does DRAIN ERROR mean on my LG WM1812CW Washer?
- EEmily MurilloAug 16, 2025
A DRAIN ERROR on your LG Washer means that the washer has not fully drained within 10 minutes.
What does DRAIN ERROR mean on my LG WM1812CW Washer?
A DRAIN ERROR on your LG Washer means that the washer has not fully drained within 10 minutes.
What causes a LOCKED MOTOR ERROR on my LG WM1812CW Washer?
A LOCKED MOTOR ERROR on your LG Washer can occur due to several reasons: the connector (3-pin, male, white) in the MOTOR HARNESS is not connected to the connector (3-pin, female, white) of STATOR ASSEMBLY; the electric contact between the connectors (3-pin, male, white) in the MOTOR HARNESS and 4-pin, female, white connector in the MAIN PWB ASSEMBLY is bad or unstable; the MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open circuited); or the hall sensor is out of order/defective.
Why does my LG WM1812CW Washer show an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can occur if the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are placed in the drum.
What causes a DOOR OPEN ERROR on my LG Washer?
A DOOR OPEN ERROR on your LG Washer can be caused by several factors: the door not being completely closed, loose electrical connections at the door switch and PWB assembly, or a malfunctioning DOOR SWITCH ASSEMBLY.
What does WATER INLET ERROR mean on my LG Washer?
A WATER INLET ERROR on your LG Washer indicates that the correct water level (246) was not reached within 8 minutes after water was supplied, or it did not reach the preset water level within 25 minutes.
What does PRESSURE SENSOR ERROR mean on my LG WM1812CW Washer?
A PRESSURE SENSOR ERROR on your LG Washer indicates that the SENSOR SWITCH ASSEMBLY is out of order.
What does THERMISTOR ERROR mean on my LG Washer?
A THERMISTOR ERROR on your LG Washer means that the THERMISTOR is out of order.
What causes a BALL SENSOR ERROR on my LG Washer?
A BALL SENSOR ERROR on your LG Washer is caused by a loose Ball Sensor Connector or a Ball Sensor that is out of order.
Why does my LG WM1812CW show a POWER FAILURE error?
A POWER FAILURE error on your LG Washer indicates that the washer experienced a power failure.
General| Type | Front Load Washer |
|---|---|
| Capacity | 4.2 cu. ft. |
| Energy Star Certified | Yes |
| Width | 27 inches |
| Color | White |
| Steam Washer | Yes |
| Steam Refresh | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| Spin Speed | 1200 RPM |
| Noise Level | 54 dBA |
Describes the advanced Brushless DC motor driving the drum directly without belts or pulleys.
Highlights the design for easier loading and unloading of clothes.
Explains the automatic dispensing of detergent, softener, and bleach at the correct times.
Details how the washer automatically detects load size to optimize wash time.
Explains the safety feature to prevent children from altering settings during operation.
General instruction to meticulously read the manual to minimize risks.
Crucial precautions to reduce hazards like fire, electric shock, and injury.
Directive to keep safety guidelines for future reference and use.
Essential guidance on proper grounding to prevent electric shock hazards.
Lists and illustrates the included accessories with the washing machine.
Explains the function of shipping bolts and the necessity of their removal.
Provides a step-by-step visual guide for removing shipping bolts before operation.
Specifies the necessary space around the washer for proper door opening and ventilation.
Presents detailed measurements and diagrams of the appliance's physical size.
Outlines specific minimal space requirements for built-in installations.
Emphasizes the critical need for a solid, level floor to prevent noise and vibration.
Details the requirements for the location and type of the electrical power outlet.
Guides on connecting the washer to a grounded outlet safely, avoiding improper connections.
Instructions on correctly attaching the water inlet hoses to hot and cold water faucets.
Explains how to properly install the drain hose for efficient water removal.
Detailed instructions on adjusting the machine's feet to ensure it is perfectly level.
Advises checking garment labels for correct washing instructions and fabric content.
Guides on sorting laundry by color, soil level, and fabric type for optimal washing results.
Instructions on preparing clothes, like checking pockets and closing zippers, before loading.
Recommends using High Efficiency (HE) detergents specifically designed for front-load washers.
Details on where and how to add detergent for the main wash cycle.
Instructions on adding liquid chlorine bleach safely and effectively.
Guidance on adding fabric softener, including dilution instructions.
Basic instructions for turning the washing machine on and off.
How to select the appropriate wash cycle based on fabric type and soil level.
Instructions on starting and stopping the wash cycle.
Guidance on choosing the correct water temperature for different garment types.
How to adjust the spin speed for different wash loads.
How to modify the soil level setting to match the load's dirtiness.
Explanation of the Prewash option for loads requiring extra treatment.
Details on using the Quick Cycle for faster washing of lightly soiled items.
How to use the Rinse+Spin option for rinsing and spinning without a full wash.
Explanation of the Extra Rinse option for thorough detergent removal.
Instructions on setting a delayed start time for wash cycles.
How to turn the audible beep signals on or off.
Guide on activating and deactivating the child lock feature for safety.
Information about the door lock indicator and when the door can be unlocked.
Instructions on cleaning the water inlet filter to ensure proper water flow.
How to clean the drain pump filter to remove lint and small objects.
Step-by-step guide for cleaning the detergent dispenser drawer and its compartments.
Advice on cleaning the washing drum to prevent limescale and rust buildup.
General advice on cleaning the washer's exterior and interior.
How to clean the external surfaces of the washing machine.
Instructions for cleaning the interior, including the door seal, for optimal performance.
Procedures to protect the washer from damage during freezing temperatures or storage.
Solutions for noise issues, typically caused by foreign objects.
Explains when thumping sounds are normal or indicate an imbalance.
Troubleshooting steps for excessive vibration, focusing on installation and load balance.
Identifies common causes and solutions for water leaks from the washer.
Guidance on resolving issues caused by too much detergent or using the wrong type.
Diagnosing and fixing problems with water supply or entry.
Troubleshooting steps for drainage issues.
Solutions for the washer failing to start, covering power and water supply.
Addresses issues where the washer fails to spin.
Explains factors that can affect and delay the wash cycle duration.
Error code and solution for inadequate water supply.
Error code and solution for drain hose or filter obstructions.
Error code and solution for load imbalance detected during the spin cycle.
Error code and solution for the door not closing or locking properly.
Error code and solution for water overfilling due to a faulty valve.
Error code and solution for a malfunctioning water level sensor.
Error code and solution for motor overload.
Error code and solution for motor overload.
Error code and solution for motor overload.
Error code and solution for a detected power failure.
Details the terms and conditions of the product's limited warranty.
Specifies the duration of warranty coverage for different components.
Lists specific situations and damages that are excluded from warranty coverage.
Provides contact details and necessary information for obtaining customer support and warranty service.
