To Next Page
A
Ashley JohnsonAug 16, 2025
What does DRAIN ERROR mean on my LG WM1815CS Washer?
- AAnne PatelAug 16, 2025
A DRAIN ERROR on your LG Washer means that the washer has not fully drained within 10 minutes.
What does DRAIN ERROR mean on my LG WM1815CS Washer?
A DRAIN ERROR on your LG Washer means that the washer has not fully drained within 10 minutes.
What causes a LOCKED MOTOR ERROR on my LG WM1815CS Washer?
A LOCKED MOTOR ERROR on your LG Washer can occur due to several reasons: the connector (3-pin, male, white) in the MOTOR HARNESS is not connected to the connector (3-pin, female, white) of STATOR ASSEMBLY; the electric contact between the connectors (3-pin, male, white) in the MOTOR HARNESS and 4-pin, female, white connector in the MAIN PWB ASSEMBLY is bad or unstable; the MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open circuited); or the hall sensor is out of order/defective.
Why does my LG Washer show an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can occur if the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are placed in the drum.
What causes a DOOR OPEN ERROR on my LG WM1815CS?
A DOOR OPEN ERROR on your LG Washer can be caused by several factors: the door not being completely closed, loose electrical connections at the door switch and PWB assembly, or a malfunctioning DOOR SWITCH ASSEMBLY.
What does WATER INLET ERROR mean on my LG WM1815CS?
A WATER INLET ERROR on your LG Washer indicates that the correct water level (246) was not reached within 8 minutes after water was supplied, or it did not reach the preset water level within 25 minutes.
What does PRESSURE SENSOR ERROR mean on my LG WM1815CS?
A PRESSURE SENSOR ERROR on your LG Washer indicates that the SENSOR SWITCH ASSEMBLY is out of order.
What does THERMISTOR ERROR mean on my LG WM1815CS?
A THERMISTOR ERROR on your LG Washer means that the THERMISTOR is out of order.
What causes a BALL SENSOR ERROR on my LG WM1815CS Washer?
A BALL SENSOR ERROR on your LG Washer is caused by a loose Ball Sensor Connector or a Ball Sensor that is out of order.
Why does my LG WM1815CS Washer show a POWER FAILURE error?
A POWER FAILURE error on your LG Washer indicates that the washer experienced a power failure.
What does EEPROM ERROR mean on my LG Washer?
An EEPROM ERROR on your LG Washer means that the EEPROM is out of order.
General| Appliance Category | Washer |
|---|---|
| Type | Front Load |
| Capacity | 4.0 cu. ft. |
| Steam Function | Yes |
| Smart Technology | No |
| Energy Star Certified | Yes |
| Wash Cycles | 14 |
| Noise Level | 54 dB |
