25
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright
position on a table.
-
- Leave a 10 cm (minimum)
space from the wall for proper
ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall
outlet.
y
Do not place the TV near or on
sources of heat, as this may
result in fire or other damage.
CAUTION
Securing the TV to a wall
(This feature is not available for all
models.)
1 Insert and tighten the eye-bolts,
or TV brackets and bolts on the
back of the TV.
-
- If there are bolts inserted at the
eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the
bolts to the wall.
Match the location of the wall
bracket and the eye-bolts on the
rear of the TV.
3 Connect the eye-bolts and wall
brackets tightly with a sturdy
rope.
Make sure to keep the rope
horizontal with the flat surface.
To Next Page
Loading...
