Mounting on a Table
1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall for
proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources of heat, as this
may result in fire or other damage.
Using the kensington security system
(Depending upon model)
The Kensington security system connector is located at
the rear of the TV. For more information of installation
and using, refer to the manual provided with the
Kensington security system or visit
http://www.
kensington.com
. Connect the Kensington security system
cable between the TV and a table.
Securing the TV to a Wall (optional)
(Depending upon model)
1 Insert and tighten the eye-bolts or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with
a sturdy rope or cable. Make sure to keep the rope
parallel to the flat surface.
CAUTION
• Make sure that children do not climb on or hang on
the TV.
NOTE
• Use a platform or cabinet that is strong and large
enough to support the TV securely.
• Brackets, bolts, and ropes are optional. You can obtain
additional accessories from your local dealer.
8
ENGLISH
To Next Page
Loading...
