ENGLISH
22
Connecting Multiple Monitors
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out
connector of Monitor 1 and connect the other end to the DP In connector of the other product.
MONITOR 1 MONITOR 2 MONITOR 3 MONITOR 4
NOTE
• If you set the tile mode using DVI-D or HDMI, you will not be able to watch HDCP-encrypted content.
• If the signal cable between the product and your PC is too long, make sure to use the Booster or optical cable.
• DP Cable - Use a DP cable that is certified to DP 1.1a standard or higher.
Using the Input List
(HOME)
• HDMI1 HDMI2 DISPLAYPORT DVI-D
To Next Page
Loading...
