Why does the image appear slowly when my LG Plasma TV turns on?
If your LG Plasma TV displays an image slowly when it turns on, note that the image is muted during the product startup process, which is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again. If it still doesn't appear, contact an authorized service center.
What to do if my LG 50PA5500 has no image and sound?
If your LG Plasma TV shows no image and produces no sound, first ensure that the TV is powered on. Next, check that the power cord is securely connected to a functioning wall outlet. To confirm the outlet's functionality, try plugging in other devices.
Why does my LG 50PA5500 keep turning off?
If your LG Plasma TV turns off suddenly, check the power control settings to ensure the power supply isn't interrupted. Also, see if the Auto sleep feature is activated in the Time settings. If there's no signal while the TV is on, it will turn off automatically after 15 minutes of inactivity.
How to fix LG 50PA5500 Plasma TV screen when using Pentouch?
To address a non-normal screen appearance when using Pentouch on your LG Plasma TV, first, verify that the computer is properly connected to the TV. Next, ensure that you are using the optimal resolution. Finally, set the aspect ratio on the TV to Just Scan.
How to fix LG Plasma TV remote control not working?
If you cannot control your LG Plasma TV with the remote, start by checking the remote control sensor on the TV and try again. Ensure there are no obstacles blocking the path between the remote and the TV. Finally, verify that the batteries in the remote are working correctly and are properly installed, paying attention to the correct polarity (+ to -, + to -).
How to calibrate touch pen on LG 50PA5500?
If the touch pen is touched on wrong positions on your LG Plasma TV, first, set the computer screen to display only on the TV. If you're using a PC signal (RGB) cable and the touch point on the TV screen doesn't match the point indicated on the computer screen, use the TV remote to navigate to [SETTINGS] ? [Picture] ? [Screen] (RGB-PC), then select [Auto Config.] to adjust the screen.
How to adjust display offset on LG 50PA5500 Plasma TV?
To fix the display offset on your LG Plasma TV, adjust the position setting in the Picture menu. Check if the video card resolution and frequency are supported by the TV. If the frequency is out of range, set to the recommended resolution using the display settings on the external device.
How to adjust speaker balance on LG 50PA5500 Plasma TV?
If there is no output from one of the speakers on your LG Plasma TV, adjust the Balance in the menu option.
How to brighten a dark screen on my LG 50PA5500?
If your LG Plasma TV screen appears extremely dark even though the power is on, adjust the brightness and contrast in the menu option.
Why is there no sound on my LG Plasma TV?
If your LG Plasma TV has no sound but the images are displaying, try the following: * Press the VOL + or - button. * Check if the sound is muted by pressing MUTE. * Try other channels to rule out a broadcast problem. * Check the audio cables are connected properly. * Ensure the TV Speaker feature is activated in the menu.
General| 3D | No |
|---|---|
| Depth | 53.34 mm |
| Width | 1168 mm |
| Height | 703.58 mm |
| Weight | 26400 g |
| Tuner type | Analog & digital |
| 24p support | Yes |
| Pixel pitch | - mm |
| Smart modes | Cinema, Game, Sports, Standard |
| HDMI version | 1.4 |
| Package depth | 228.6 mm |
| Package width | 1330.96 mm |
| Product color | Black |
| LED indicators | Power, Stand-by |
| Package height | 817.88 mm |
| Package weight | 34380 g |
| Playback modes | Zoom |
| RMS rated power | 20 W |
| AC input voltage | 100 - 240 V |
| Display diagonal | 49.9 \ |
| AC input frequency | 50 - 60 Hz |
| Composite video in | 0 |
| Depth (with stand) | 297.18 mm |
| Dimensions (WxDxH) | 1168 x 53.34 x 703.58 mm |
| Display brightness | - cd/m² |
| Display technology | Plasma |
| Number of speakers | 2 |
| HDMI ports quantity | 3 |
| Height (with stand) | 756.92 mm |
| High frequency rate | 600 Hz |
| Weight (with stand) | 28800 g |
| Supported video modes | 1080i, 1080p, 720p |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | AAC, HE-AAC, LPCM, MP2, MP3, MS-ADPCM, WMA |
| Image formats supported | JPG |
| Number of OSD languages | 32 |
| Video formats supported | AVI, DAT, DIVX, MKV, MPEG, MPEG1, MPEG2, MPG, TRP, TS, VOB |
| Contrast ratio (dynamic) | 3000000:1 |
| Contrast ratio (typical) | - |
| Panel mounting interface | 400 x 400 mm |
| Annual energy consumption | 190 kWh |
| Display diagonal (metric) | 127 cm |
| Analog signal format system | NTSC |
| Power consumption (standby) | 0.2 W |
| Sustainability certificates | ENERGY STAR |
| Digital signal format system | ATSC, DVB-C, DVB-T |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Dimensions (W x D x H) with stand | 1168 x 297.18 x 756.92 mm |
| On Screen Display (OSD) languages | ENG, ESP, FRE, KOR |
| Consumer Electronics Control (CEC) | Anynet+ |
To Next Page
