SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement
.
V Application Range
This spec is applied to the 50” PLASMA TV used PD61C Chassis.
V Specification
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
V Test Method
1) Performance : LGE TV test method followed.
2) Demanded other specification
Safety : CE, IEC specification
EMC : CE, IEC
V General Specification
1. Module Specification ( 50” XGA MODULE )
- 10 -
Display Screen Device
Aspect Ratio
PDP Module
Screen Filter
Operating Environment
Storage Environment
Input Voltage
1
2
3
4
5
6
7
No Item Specification Remark
50” Wide Color Display Module
16:9
PDP50X3,
RGB Closed Type
45% Total light transmittance (E-Mesh)
1)Temp. : 0~40deg
2)Humidity : 0~80%
3)Temp. : -20~60deg
4)Humidity : 10~90%
100-240V~, 50/60H
Plasma Display Panel
Maker : NBL/ Mitsui/ LG Chemical
LGE SPEC
Maker : LG
Chassis
PD61C 50PC1D-FC France LG
Model Name Market Brand Remark
50PC1D-FC Safety : IEC/EN60065
EMI : EN55013
EMS : EN55020
France
TEST
Model ApplianceMarket Remark
To Next Page
Loading...
Need help?
General
