To Next PageTo Next PageWhat to do if the interface screen doesn't display correctly on my LG TV?
If the entire interface screen is not displaying correctly on your LG TV, the suggested solution is to check the interface signal condition.
What to do if the VSC low pressure output doesn't come out on my LG TV?
If the VSC low pressure output is not present in your LG TV, check the Y B/D Module output circuit.
What to do if the No 5V Monitor signal doesn't come out on my LG 50PG1000-ZA?
If the No 5V Monitor signal is not present in your LG TV, check the VSC RL-ON signal.
What to do if the high tension output doesn't occur on my LG TV?
If the high tension output does not occur, examine the VSC low voltage output circuit.
What to do if the 5V Monitor signal doesn't come out on my LG TV?
If the 5V Monitor signal doesn't appear, check the VSC RL-ON signal.
What to do if the VSC signal RL-ON doesn't come out on my LG TV?
If the VSC signal RL-ON does not appear, check the VSC Vs-ON.
Why is the high tension output voltage dropping on my LG 50PG1000-ZA's power board?
If you're experiencing a drop in the high tension output voltage from the power board of your LG TV, the suggested solution is to check the Power Board's output high tension circuit.
What to do if the Interface Power Off signal is active on my LG 50PG1000-ZA TV?
If the Power Off signal is active on the interface of your LG TV, you should check the Power Off condition.
What to do if the high tension output VSC signal doesn't come out on my LG 50PG1000-ZA TV?
Details buttons and indicators on the TV's front panel.
Identifies and explains rear panel connections.
Step-by-step guide for attaching the TV stand.
Instructions for preventing tip-over and ensuring safe operation.
Automatically adjusts volume level when changing programs.
Sets the TV's menu language and country.
Selects preferred audio and subtitle languages for digital broadcasts.
Sets the TV's internal clock automatically or manually.
Configures automatic TV turn-on and turn-off times.
Sets a timer to automatically turn off the TV after a period.
Enables setting a password and locking TV functions.
Prevents specific programs from being watched.
Restricts viewing based on ratings information from broadcasters.
Connects and sets up an HD receiver using component or HDMI.
Connects a DVD player using component, scart, or HDMI cables.
Connects a VCR using RF, scart, or RCA cables.
Connects a PC to the TV via D-sub or HDMI/DVI cable.
Explains the function of each button on the remote control.
Steps to turn the TV on from standby mode.
Automatically finds and stores available TV channels.
Controls connected AV devices via HDMI for simplified operation.
Turns the Electronic Programme Guide on or off.
Selects a desired program from the EPG listing.
Explains button functions for setting program recording/reminders.
Adjusts screen aspect ratio (16:9, 4:3, Zoom, etc.).
Selects pre-defined picture modes for optimal viewing.
Allows manual adjustment of picture settings like brightness and contrast.
Resets picture settings to default factory values.
Resets the TV to its original factory settings.
Lists common TV problems and their solutions.
Guidance on cleaning the screen and cabinet for longevity.
Details dimensions, weight, power, and environmental conditions.
General
