To Next PageTo Next PageWhat to do if the interface screen doesn't display correctly on my LG 50PG3000?
If the entire interface screen is not displaying correctly on your LG TV, the suggested solution is to check the interface signal condition.
What to do if the high tension output VSC signal doesn't come out on my LG TV?
If the high tension output VSC signal is not present in your LG TV, the suggested solution is to check the VSC low voltage output circuit.
What to do if the VSC low pressure output doesn't come out on my LG 50PG3000 TV?
If the VSC low pressure output is not present in your LG TV, check the Y B/D Module output circuit.
What to do if the VSC signal RL-ON doesn't come out on my LG 50PG3000?
If the VSC signal RL-ON is not present in your LG TV, check the VSC Vs-ON.
What to do if the No 5V Monitor signal doesn't come out on my LG 50PG3000?
If the No 5V Monitor signal is not present in your LG TV, check the VSC RL-ON signal.
Why is the high tension output voltage dropping on my LG TV's power board?
If you're experiencing a drop in the high tension output voltage from the power board of your LG TV, the suggested solution is to check the Power Board's output high tension circuit.
What to do if the Interface Power Off signal is active on my LG 50PG3000 TV?
If the Power Off signal is active on the interface of your LG TV, you should check the Power Off condition.
Why is the Z B/D Module output voltage dropping on my LG TV?
If the output voltage of the Z B/D Module in your LG TV is dropping, check the Z B/D Module output circuit.
General| Comb filter | Yes |
|---|---|
| Pixel pitch | 0 mm |
| Aspect ratio | 16:9 |
| Audio system | SRS TruSurround XT |
| Product color | Black |
| Response time | 0.001 ms |
| Package weight | 50700 g |
| RMS rated power | 20 W |
| Display diagonal | 50 \ |
| Depth (with stand) | 364 mm |
| Display brightness | 1500 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Display technology | Plasma |
| Power requirements | 100-240V, 50/60 Hz |
| Width (with stand) | 1225 mm |
| HDMI ports quantity | 3 |
| Height (with stand) | 790 mm |
| Weight (with stand) | 41700 g |
| SCART ports quantity | 2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 1 |
| Contrast ratio (typical) | - |
| Power consumption (standby) | 0.8 W |
| Power consumption (typical) | 420 W |
