LG 50PJ2 Series User Manual

10
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Automatically adjust the picture position and minimizes image instability. After adjustment, if the image
is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
AUTO CONFIGURE (RGB [PC] MODE ONLY)
To Set
Auto Config.
Move
Prev.
Resolution
Position
Size
Phase
Reset
Yes No
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
1
Select PICTURE.
2
Select Screen.
3
Select Auto Config..
4
Select Yes.
5
Run Auto Config..
OK
Move
• Brightness 50
• Sharpness 60
• Colour 60
• Tint 0
• Colour Temperature 0
• Advanced Control
• Picture Reset
Screen
PICTURE
Screen
▲
R G
W
C
• Press the MENU/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
Screen

LG 50PJ2 Series Specifications

General

Brand	LG
Model	50PJ2 Series
Category	Plasma TV
Language	English