88
ENGLISH
Command
Data
(Hexadecimal)
1 2
100 [Frame Control] s n,b7 00 to 01
101
[Average Picture Level Auto
Control]
s n,be 00 to 01
102 Read Brightness Value m u FF
103 [Screen Fault Detection] t z 00 to 01
104 [Stereo Mode] s n,c2 00 to 02
105 [HDR Picture Mode] s n,c4 See [HDR Picture Mode]
106 [Dynamic Tone Mapping] s n,c5 00 to 01
107 [LED Local Dimming] s n,c6 00 to 03
108 [USB2 to HDBaseT] s n,c3 00 to 01
109 [Change Password] s n,a7 See [Change Password]
110 [Brightness Range Adjustment] s n,ab See [Brightness Range Adjustment]
111 [Color Calibration] s n,d6 00 to 01
112 [Quiet Mode] s n,c7 00 to 01
* Note Commands may not work when there is no external input used.
* Some commands may not be supported on some models.
To Next Page
Loading...
