16 ASSEMBLINGANDPREPARING
Setting Up theTV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the Stand
If you are not mounting theTV to a wall, use the following instructions to attach the stand.
cAuTIoN
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, theTV may
tilt forward after being installed.)
• Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.
Remove the stand before installing theTV on a wall mount by performing the stand attachment in reverse.
(For 55EG9600)
,g
Brace
Stand Cover
_ CAUTION
When assembling the stand, lay the packing
brace on a table or product box and then
place theTV with its screen facing down
on the packing brace. Be sure to protect
the screen from scratches. When there is no
packing brace provided, make sure that you
place the screen on soft clothing or a cushion.
• Do not place the TV without the stand
attached into its upright position.The
protruding Joystick Button may be damaged.
Base
To Next Page
Loading...
