LG 55EJ5E - Page 116

ENGLISH
78
93. DPM Wake Up Control (Command: s n, 0b)
Selects a DPM Wake Up option.
Transmission
[s][n][ ][Set ID][ ][0][b][ ][Data][Cr]
Data 00: Clock
01: Clock+DATA
Acknowledgment
[n][ ][Set ID][ ][OK/NG][0][b][Data][x]
* This feature may not be supported in some models.
94. Fan Failure Check (Command: d w)
Check the fan malfunction.
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data FF: Read status
Acknowledgment
[w][ ][Set ID][ ][OK/NG][Data1] [Data2] [x]
Data 1 00: Fan failure
01: Fan normal
Data 2 00: 0 faults (Fan Normal)
01: 1 fault
02: 2 faults
03: 3 faults
04: 4 faults
05: 5 faults
06: 6 faults
07: 7 faults
08: 8 faults
09: 9 faults
0A: 10 are faulty.
* This feature may not be available on some models.
95. Apply to all inputs (Command: s n, 52)
Apply the video mode and low value of the current input to the
same video value of all inputs.
Transmission
[s][n][ ][Set ID][ ][5][2][ ][Data][Cr]
Data 01: Apply
Acknowledgment
[n][ ][Set ID][ ][OK/NG][5][2][Data][x]
* This feature may not be available on some models.
* Other commands do not work for a certain time after
applying.