EXTERNAL EQUIPMENT SETUP
,,,_To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
,,,iImage shown may differ from your TV.
HD RECEIVERSETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if
you do receive digital signals from a digital set-top box or other digital external device.
Component Connection
I. How to connect
0
Connect the video outputs (Y, PB,PR) of the digital set-
top box to the COMPONENT IN VIDEO I jacks on
the TV. Match the jack colors (Y = green, PB = blue, and
PR = red).
O onnect the audio output of the digital set-top box to
the COMPONENT IN AUDIO ] jacks on the TV.
2. How to use
Turn on the digital set-top box.
(Referto the owner'smanualfor the digital set-top boxoperation.)
Select the Component1 input source on the TV using the
INPUT button on the remote control.
If connected to COMPONENT IN 2 input, select the
Component2 input source on the TV.
x
m
z
XD
c
"0
m
z
c
Supported Resolutions
Y, CB/PB, CR/PR
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
15.73 59.94
15.73 60.00
31.47 59.94
31.50 60.00
44.96 59.94
45.00 60.00
[[[[
33.72 59.94
33.75 60.00
26.97 23.976
2Z00 24.00
33.71 29.97
33.75 30.00
6Z432 59.94
6Z50 60.00
25
To Next Page
Loading...
