WATCHING TV / CHANNEL CONTROL
TURNING ON THE TV
"-r"
z
<
N
-r
>
z
z
fT1
N
©
Z
©
@
First, connect power cord correctly.
And switch the AC power control switch on TV (Except 52/42/47(::140)o
At this moment, the TV switches to standby mode.
01_In standby mode to turn TV on, press the _/I , INPUT, CH (AT or A v ) button on the TV or press the
POWER, INPUT, CH (^ or v ), Number (0~9) button on the remote control.
Select the the INPUT button the remote control.
viewing by
source
using
on
01_This TV is programmed to remember which power state it was last set to, even if the power cord is out.
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby
mode.
CHANNELSELECTION
Press the CH (^ or v) or NUMBER buttons to select a channel number.
VOLUMEADJUSTMENT
Adjust the volume to suit your personal preference.
O Press the VOL (+ or -) button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
O You can cancel the Mute function by pressing the MUTE or VOL (+ or -)
button.
44
To Next Page
Loading...
