The latest version can be obtained via digital broadcast signals or internet connections.
Changing the programme while downloading the software via digital broadcast signal
interrupts the download process. Returning to the initial programme allows downloading to
resume.
If software is not updated, certain functions may not work properly.
In some countries, Auto Update is not displayed if you are not connected to the Internet.
Your device will have to occasionally download and install software updates in order to
maintain optimal functionality. While the software is updated the screen of your device may,
in the absence of any user interaction within 4 hours, turn off, but the device will not
completely enter standby mode until the installation is finished. This can result in an
increased power consumption during software update.
Screen Self-diagnosis
Support Screen Self-diagnosis
After running a test to verify that the image signal is output normally, you can select
whether there is an error with the signal on the screen.
If there are no problems in the test, check the connected external device or broadcast
signal.
Sound Self-diagnosis
Support Sound Self-diagnosis
Start the Sound Test to check that the sound signal output is normal, and then select
whether there is an error.
If there are no problems in the test, check the connected external device or broadcast
signal.
Privacy & Terms
Support Privacy & Terms
User Agreements
These are the terms and conditions related to use of the Smart TV service and
protection of privacy.
Legal Notice
It's a legal notice for services provided via TV.
To Next Page
Loading...
