LG 55VL5PJ User Manual (English)

Other manuals for LG 55VL5PJ

Questions and Answers:

O
oharrisAug 25, 2025
Why is my LG Digital Signage screen displayed abnormally?
- M
  Mr. Kenneth PhillipsAug 26, 2025
  If your LG Digital Signage screen is displaying abnormally, try the following: * Connect the signal cable that matches the source input signal. * If condensation appears on the screen, allow some time after powering on for it to disappear. * When connecting the panel and the Signage box, check that their serial numbers match. If they do, unplug the power cord and plug it in again to run the Clear Panel Noise feature. You can also run this feature in (Settings) [Display] [Advanced Settings] [OLED Panel Settings] [Clear Panel Noise] menu.
A
Andrew ShermanAug 26, 2025
What to do if the power suddenly turned off on LG 55VL5PJ?
- J
  Jacqueline RandolphAug 26, 2025
  If your LG Digital Signage suddenly turns off, check these potential causes: * Verify if the auto-off function is activated in the time-related settings. * Ensure the product power cord is properly connected, as the power source may not be supplied correctly. * Check the power control settings. * If the internal temperature of the enclosure rises, the power may shut down; clean the heat exchanger or filter periodically. * Check if the fan is working properly.
P
Paul RasmussenAug 27, 2025
How to fix LG Digital Signage showing ‘No signal’ or ‘Invalid Format’ message?
- T
  tanya91Aug 27, 2025
  If your LG Digital Signage displays a ‘No signal’ or ‘Invalid Format’ message, try these steps: * Check the signal cable. * Access the input menu to verify the input signal. * Adjust the frequency range by referring to the specifications in this manual.
F
floresmatthewAug 27, 2025
How to correct the position of the screen on LG 55VL5PJ Digital Signage?
- M
  Michael MontesAug 27, 2025
  To correct the screen position on your LG Digital Signage: * Check if the graphics card resolution and frequency are supported by the product. If the frequency exceeds the supported range, use PC settings to set the resolution to the recommended value. * Press the button on the remote control to automatically select the optimal screen status. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
E
Elizabeth BooneAug 27, 2025
Why does the ‘Unknown Product’ message appear when connecting LG Digital Signage?
- R
  rebecca54Aug 27, 2025
  If you see an 'Unknown Product' message when connecting your LG Digital Signage: * Check if the driver of PC(graphics card) has been installed. * Check if the plug and play function is supported by the PC(graphics card) user manual.
K
Kathleen HullAug 28, 2025
Why is the screen brightness dark on my LG 55VL5PJ Digital Signage?
- W
  Wendy BakerAug 28, 2025
  If the screen brightness appears dark on your LG Digital Signage: * Try adjusting the brightness and contrast again. * The backlight may need repair. * If the internal temperature of the enclosure rises, the screen's brightness may darken; clean the heat exchanger or filter in the enclosure periodically.
J
jennifer69Aug 29, 2025
How to fix images flickering on LG Digital Signage?
- D
  danielperkinsAug 29, 2025
  If images are flickering or fluttering on the screen of your LG Digital Signage: * If you turn the monitor on when it is cold, the screen may flicker. This is normal. * Make sure that the current resolution and frequency settings of the graphics card are supported by the monitor.
B
Brittany HuertaAug 25, 2025
How to fix LG 55VL5PJ power won't turn on?
- A
  andreajohnsonAug 25, 2025
  If your LG Digital Signage won't turn on, try these solutions: * Ensure the power cord is correctly plugged into the power outlet. * If operating in below-zero temperatures, the enclosure may take up to one hour to raise the internal temperature. * For models with a circuit breaker, verify it's properly connected and switched to the 'on' (red) position. * Try turning the power on after disconnecting the AC adapter and cleaning the contacting port. * When using POE, ensure the LAN cable is not damaged. * Do not connect the AC adapter when using POE power.
S
Stephanie YoungAug 30, 2025
How do I resolve horizontal noise or blurred characters on my LG Digital Signage?
- D
  Denise GeorgeAug 30, 2025
  To resolve horizontal noise or blurred characters on your LG Digital Signage, press the button on the remote control to automatically select the optimal screen status that fits into the current mode. If the adjustment is not satisfactory, adjust the display settings manually in the OSD menu.
B
Brittany GibsonAug 30, 2025
What to do if there is no sound output from LG Digital Signage?
- L
  Lori NewtonAug 30, 2025
  If there is no sound output from your LG Digital Signage: * See if the audio cable is connected properly. * Adjust the volume of the product or external device. * See if the sound is set properly.

LG 55VL5PJ Specifications

General

Panel Technology	IPS
Contrast Ratio	1200:1
Viewing Angle (H x V)	178 x 178
Operating System	webOS
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 80%
Standby Power Consumption	0.5 W
Built-in Speaker	Yes
VESA Mount Compatibility	300 x 300 mm
Screen Size	55"
Resolution	1920 x 1080
Response Time	8 ms
Input	HDMI, DisplayPort
Output	Audio Out
Connectivity	Wi-Fi, Bluetooth