ENGLISH
70
50. [ISM Method] (Command: j p)
Selects an ISM method.
Transmission
(j)(p)( )([Set ID])( )(Data)(Cr)
Data 01: [Inversion] (Invert)
02: [Orbiter] (Move)
04: [White Wash] (Remove; white pattern)
08: [Normal] (Standard)
20: [Color Wash] (Color pattern)
80: [Washing Bar]
90: [User Image]
91: [User Video]
* The jp command only works when the timer has been set to
Immediately.
Acknowledgment
(p)( )([Set ID])( )(OK/NG)(Data)(x)
* This feature may not be supported on some models.
51. [Network Settings] (Command: s n, 80 or 81 or
82)
Configures network and DNS settings.
Transmission
(s)(n)( )([Set ID])( )(Data1)( )(Data2)( )
(Data3)( )(Data4)( )(Data5)(Cr)
Data1 80: Configures/views the temporary IP mode
(Auto/Manual), subnet mask, and gateway.
81: Configures/views the temporary DNS address.
82: Saves temporary settings and views
information about the current network.
* If Data1 is 80,
Data2 00: Auto
01: Manual
FF: Views the temporary IP mode (Auto/Manual),
subnet mask, and gateway.
* If Data 2 is 01 (Manual),
Data3 Manual IP address
Data4 Subnet mask address
Data5 Gateway address
* If Data1 is 81,
Data2 DNS address
FF: Displays the temporary DNS address.
* If Data1 is 82,
Data2 80: Applies the temporarily saved IP mode (Auto/
Manual), subnet mask and gateway.
81: Applies the temporary DNS address
FF: Information on the current network (IP, subnet
gateway and DNS)
* An example of settings,
1. Auto: sn 01 80 00
2. Manual: sn 01 80 01 010177223241 255255254000
010177222001 (IP: 10.177.223.241, subnet:
255.255.254.0, gateway: 10.177.222.1)
3. Network read: sn 01 80 ff
4. DNS settings: sn 01 81 156147035018
(DNS: 156.147.35.18)
5. Applying the settings: sn 01 82 80 (applies the saved IP
mode (auto/manual), subnet mask, and gateway), sn 01 82
81 (applies the saved DNS)
* Each IP address contains 12 decimal digits.
Acknowledgment
(n)( )([Set ID])( )(OK/NG)(Data1)(Data)(x)
* This feature is available only for wired networks.
* This feature may not be supported on some models.
To Next Page
Loading...
