To Next Page

To Previous Page

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept any

interference received, including interference that may cause undesired operation of the device. Any

changes or modifications in construction of this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the

building, as close to the point of the cable entry as practical.

For USA

LG Recycling Policy

LG Electronics offers a customized e-waste take-back and recycling service that meets local

needs and requirements in the countries where e-waste regulations are in place, and also provides

product and packaging take-back and recycling service voluntarily in some countries. LG Electronics

evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the

goal of improving recyclability where practicable. Through these activities, LG seeks to contribute

to conserving natural resources and protecting the environment.

For more information about the LG Recycling Policy, please visit our global site at

http://www.lg.com/global/sustainability/environment/take-back-recycling

Questions and Answers:

Need help?

Do you have a question about the LG 60LB5200 and is the answer not in the manual?

LG 60LB5200 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	59.5 \
Display brightness	- cd/m²
Supported video modes	720p, 1080i, 1080p
Motion interpolation technology	-
3D	No
Storage temperature (T-T)	-20 - 60 °C
Storage relative humidity (H-H)	70 - 85 %
Operating relative humidity (H-H)	70 - 80 %
Audio decoders	Dolby Digital
RMS rated power	20 W
Number of speakers	2
Headphone outputs	0
RF ports quantity	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio formats supported	MP3
Image formats supported	JPEG XR
Product color	Black
Panel mounting interface	400 x 200 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Package depth	178 mm
Package width	1500 mm
Package height	864 mm
Package weight	29490 g
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions