To Next PageTo Next Page
Need help?Do you have a question about the LG 60LB5900 and is the answer not in the manual?
General| Screen Type | led |
|---|---|
| Wall Mount | 400mm x 400mm |
| Screen Size | 59.5 inches, 60 inches |
| Refresh Rate | 120hz |
| USB Ports | 1 |
| RF Antenna | yes |
| Digital Optical Audio Outputs | 1 |
| Component Video Inputs | 1 |
| Composite Video Inputs | 1 |
| DVI | 0 |
| Remote Control | standard |
| 3D | no |
| Width with Stand | 54.13 inches |
| Depth without Stand | 2.38 inches |
| Height without Stand | 31.5 inches |
| Net Weight without Stand | 50.7 pounds |
Essential safety parts should be replaced with the same components to prevent hazards.
General advice for servicing, including using isolation transformers and handling fuses.
Procedure to check AC leakage current to ensure safety.
General guidelines for safely performing service on the receiver.
Precautions for handling sensitive electronic components to prevent static damage.
Best practices for soldering, including temperature and material recommendations.
Steps for removing and replacing integrated circuits on circuit boards.
Procedures for handling small-signal and power transistors.
Instructions for removing and replacing diodes, including polarity.
Guidelines for replacing fuses and conventional resistors.
Techniques for repairing damaged copper traces on printed circuit boards.
Defines the scope and application of the specification sheet.
Specifies the environmental and voltage conditions for testing.
Outlines the methods used for product testing and validation.
Details supported TV broadcast systems and frequency bands.
Specifies input voltage range and target markets.
Lists supported screen sizes and aspect ratios.
Information on internal modules and operating conditions.
Lists supported video resolutions for component input.
Details supported resolutions for DTV and PC via HDMI.
Supported 3D resolutions and modes for RF input.
Supported 3D resolutions and modes for HDMI input.
Supported 3D resolutions and modes for USB input.
Details the functionality for converting 2D content to 3D.
Information regarding DLNA connectivity and features.
Notes and remarks on various 3D input modes.
Outlines the applicability and general specifications for adjustments.
Lists the main adjustment categories and items.
Details adjustments for the main Printed Circuit Board assembly.
Procedure for downloading EDID data for optimal resolution.
Instructions for adjusting white balance during final assembly.
Lists necessary tools and equipment for white balance calibration.
Illustrates the setup for connecting measurement equipment.
Commands and step-by-step procedures for white balance adjustment.
Provides reference coordinates and color temperatures for white balance.
Guidance on selecting country-specific options.
Lists equipment and procedures for inspecting 3D modules.
Steps for preparing and conducting ground and high potential tests.
Specifies input signal conditions for audio testing.
Details the required specifications for audio output.
Steps for downloading software via USB and setting tool options.
Flowchart for diagnosing power-up issues.
Troubleshooting steps for digital and analog TV video signals.
Diagnostic procedures for AV and component video inputs.
Diagnosing problems related to HDMI signals and EDID data.
Troubleshooting steps for audio problems across all sources.
Diagnosing audio problems with digital and analog TV signals.
Troubleshooting steps for AV and component audio inputs.
Schematic overview of the 2D model's main components and connections.
Schematic overview of the 3D model's main components and connections.
Diagram showing I2C communication paths for various components.
Visual breakdown of the TV showing assembly and part locations.
Test point locations for CI slot connections.
Test point locations for SCART connections.
Test point locations for S2 connections.
Test point locations for FE TS DATA.
Test point locations for headphone connections.
Schematic diagrams for power detection circuits.
Schematic for USB connector and associated capacitor circuits.
Schematics for HDMI 1, HDMI 2, and MHL interfaces.
Schematic for Consumer Electronics Control (CEC) functionality.
Schematic for the SPDIF optical jack and associated components.
Schematic for the 51-pin LVDS connector for FHD.
Schematic for the 30-pin LVDS connector for HD.
Schematics detailing DDR3 memory configurations and connections.
Schematic for the serial flash memory used for SPI boot.
Schematics for the global tuner blocks for KR and AJ models.
Schematics for component and AV input/output connectors.
Schematic for the headphone jack, detection, and control circuits for EU models.
Schematics for RS-232C and MSTAR debug connectors.
Schematics for IR receiver, LED indicators, and digital eye sensor.
Detailed schematics of the main SOC and associated memory chips.
Schematics for MHL switch and gate logic.
