GP4
ENG
It is a function you can use to save the programme you are currently watching
temporarily on a USB device so you can play back a scene you missed while
watching TV. This function allows you to continue watching from where you
were previously if you go out for a while.
✎ You have to set the TimeShift mode to ON after connecting a USB device to
use the TimeShift function.
✎ This function works for analogue/digital programmes and AV input mode.
✎ With the TimeShift function, you can play a programme back for up to two
hours. This time may vary depending on your region.
✎ While in the TimeShift mode, the picture stored by this function is deleted
if you turn off the TV without recording it.
To Next Page
Loading...
