What to do if my LG 65WU960H TV has no picture?
If your LG TV shows no picture, first ensure the TV is turned on. Check the antenna or cable connection to the TV. Verify all connections are correct. If applicable, connect the MPI cable to the MPI device. If the program is encrypted, try changing to another channel. Finally, adjust the Installer Menu settings if the tuning band is incorrect.
Why is my LG 65WU960H TV remote not working?
If the remote for your LG TV isn't working, ensure it is in TV Mode by pressing the MODE key. Point the remote directly at the IR receiver on the TV, and make sure you are close enough, without obstructions. If applicable, connect the MPI cable to the MPI device. Replace the batteries if they are weak, and check that the '+' and '-' are correctly aligned when replacing them.
How to fix LG 65WU960H with picture but no sound?
If your LG TV has a normal picture but poor or no sound, first ensure that the audio is not muted by pressing the MUTE button or using the Volume Up key. If that doesn't work, the issue may be with the broadcast itself, so try changing to a different channel.
Why can't I enter channel numbers directly on my LG 65WU960H?
If you cannot directly enter a channel number on your LG TV, it could be due to the TV being in Pass-through Mode with Installer Menu item 028 CH. OVERIDE set to 0 (disabled). To enable direct keypad entry, set CH. OVERIDE to 1. Alternatively, if the TV is not in Pass-through Mode, the channel you're trying to enter may not be included in the applicable Channel Map. If necessary, make changes to the Channel Map using the appropriate application/content editor.
General| Screen Size | 65 inches |
|---|---|
| Display Type | OLED |
| Smart TV | Yes (webOS) |
| HDMI Ports | 4 |
| USB Ports | 3 |
| Refresh Rate | 120 Hz |
| HDR | HDR10, Dolby Vision |
| Bluetooth | Yes |
| Wi-Fi | Yes (Wi-Fi 5) |
To Next Page
