LG 65WU960H - Basic Settings Wizard

18
206-4335
This section describes the conguration options available when you select “Basic Settings” from the
First Use Wizard / Welcome screen. You can select the “BACK” button, where available, to check
previous settings, as necessary.
Note: Each Basic Settings Wizard step is allotted a 10-second time frame after which the wizard
proceeds without user interaction. If default settings are appropriate, the wizard can proceed
through each of the conguration steps with no further user interaction. If you turn OFF the TV
while the Basic Settings Wizard is in progress, when you turn the TV back ON, the First Use
Wizard / Welcome screen will be displayed. You will then have the opportunity to (re)initiate the
desired conguration process.
Note: To exit the wizard at any time, use the arrow keys on the Installer Remote to select/highlight
the
X
button at the top right of the screen, and then press the Wheel (OK) button. In the exit
conrmation screen, select EXIT, and then press the Wheel (OK) button once more on the Installer
Remote.
1. In the Language & Location screen, use the arrow keys on the Installer Remote to select/
highlight each appropriate eld in turn—Language or Timezone—and then press the Wheel (OK)
button. Then, use the up/down arrow keys to select the applicable value from the drop-down
list of options for the selected eld. When you are ready to continue, use the arrow keys on the
Installer Remote to select NEXT, and then press the Wheel (OK) button.
Note: The Country eld is inaccessible/grayed out because these models are only available in
the US. Also, if you allow the wizard to progress without specifying data in this screen, the time
zone will be set for Adak (Hawaii-Aleutian Standard Time).
BACK
LANGUAGE & LOCATION
Confirm your language and location settings.
Language
English
Country
Disabled
Timezone
Select...
NEXT
X
01
^
^
^
This wizard will continue automatically in 10 seconds.
2. The next screen enables you to congure the network settings of the TV. Refer to the appropriate
subsection(s) below for information on conguring the wired and/or wireless connection(s)
between the TV and the network. When you are ready to continue, use the arrow keys on the
Installer Remote to select NEXT, and then press the Wheel (OK) button.
Note: If you do not want to congure/complete conguration of network settings at this time,
you can select/highlight SKIP, and press the Wheel (OK) button on the Installer Remote to
continue to the next step.
Basic Settings Wizard
(Continued on next page)