GP2
eng
LNB Power
To enable the power supply for the LNB, select On. If you
select Off, Motor Type is disabled.
DiSEqC
When using DiSEqC, select one option from A~D/ToneA~B.
If you use DiSEqC, Unicable and Motor Type are disabled.
Unicable Settings
Select On to use Unicable and set the Unicable in the
Unicable Setting menu. When Unicable is enabled, 22KHz
Tone, DiSEqC, Motor Type are disabled.
Motor Type
Select Motor Type to use Motor and set the Motor in the
Motor Setting menu. When Motor is enabled, 22KHz Tone,
DiSEqC, Unicable are disabled.
To Next Page
Loading...
