GP4
eng
✎ This function only works on devices with the SimpLink logo ( ).
Verify that the external device has a SimpLink logo.
✎ To use the SimpLink function, you need to use a high-speed HDMI
Ⓡ
cable
(with CEC, or Consumer Electronics Control, feature added). High-speed
HDMI
Ⓡ
cables have the No. 13 pin connected for information exchange
between devices.
✎ Turn on or select the media of a device with home theatre features to see
the speaker switch to External Speaker.
✎ Connect with an Optical cable (sold separately) to use External Speaker.
✎ Switching to external input causes devices operating with SimpLink to
stop.
✎ Use of a third-party device with HDMI-CEC features may cause malfunctions.
✎ Optical cable connection is supported only for models with the optical digital
port.
To Next Page
