LG 65EW960H - Page 48

48
206-4307
Cloning Procedures (Cont.)
(Continued from previous page)
Note: In order for the proper location-specic TV Zone and/or Wi-Fi Zone prole
data to be applied, the Zone designation(s) must be assigned in the Target TV(s)
BEFORE importing is initiated.
4. Insert the USB memory device with the Clone/Conguration (.tlx) le into either of the USB
ports on the Target TV.
5. Press the button on the Installer Remote to display the TV setup menus (TV is in Pass-
through Mode) or the Function Menu (TV is already in FTG Mode).
6. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the
screen, select the All Settings menu icon and press the Wheel (OK) button to access the
advanced TV setup menus.
7. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number “7” key
a total of seven times to access the TV Manager.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
Select the file(s) to download, and then select UPDATE below.
Update TV Software
EW960H_CPU_SW.epk
Update PTC Software
EW960H_PTC_SW.txt
Import Clone File
EW960H_IM.tlx
X
USBDEVICE
TV MANAGER
Ez Download
USB 1: Device Name
Ez Download
Update TV Software
Update PTC Software
Import Clone File
Diagnostics
UPDATE
Current TV Software Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
filename .epk/Version: version#
8. If more than one USB memory device is currently connected to the TV, be sure to select the
USB device that contains the “.tlx” le you wish to use. If necessary, use the arrow keys on the
Installer Remote to select/highlight the USB DEVICE button in the top right corner of the screen
and press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the appropriate
USB device from the pop-up list of USB devices displayed at the top of the screen.
USB Device
USB 1: Device 1
USB 2: Device 2
9. Use the Up/Down arrow keys to select Import Clone File, and then press the Wheel (OK) button.
A list of the “.tlx” les stored in the root folder of the USB memory device will be displayed on
the screen.
(Continued on next page)