When connected with HDMI eARC, the output audio type will depend on the audio type
supported by the connected device.
Using eARC Supported Audio Device
Sound Advanced Settings eARC Support
eARC is a technology that can send and receive more sound information faster thanks
to its wider bandwidth than that of the conventional ARC. You can enjoy TV sound with
higher quality than ARC through a connected audio device.
Accessibility
To Use Audio Guidance
General Accessibility Audio Guidance
If Audio Guidance is set to On, audio guides will be provided in various situations, such
as when you change programmes, adjust the volume or change settings and input
signals.
Speed
Adjust the speed of spoken guide.
Volume
Adjust the volume of spoken guide.
Pitch
Adjust the tone of spoken guide.
Depending on the device connected and input audio type, it can be output as Dolby
Metadata-Enhanced Audio Transmission PCM (Dolby MAT PCM).
●
If Digital Sound Output is set to Pass Through and HDMI input is Dolby TrueHD or
Multi-Channel PCM, audio can be output as Bypass.
●
Connect an audio device that supports eARC to the HDMI (eARC/ARC) port.01
Go to Sound Out Use Wired Speaker and choose HDMI(ARC) Device.02
Set eARC Support to On.03
To Next Page
Loading...
