Parts and buttons
Image shown may differ from your TV.
TV can be placed in standby mode in order to reduce the power consumption. And TV should beswitched off using
the power switch on the TV if it will not be watched for some time, as this willreduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced,
and this will reduce the overall running cost.
NOTE
CAUTION
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of
glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Button Description
Turns the power on or off
Changes the input source
Accesses the Home menu, or saves your input and exits the menus.
Selects the highlighted menu option or confirms an input
Adjusts the volume level
Scrolls through the saved programmes
( You can set the Power indic-
ator to on or off by selecting
OPTION in the Home menu
- SETUP.）
Speakers
Remote control
intelligent sensor
(Adjusts the image quality and
brightness based on the surr-
ounding environment.)
Power indicator
Screen
1
2
P
OK
INPUT
HOME
INPUT
MENU
OK
P
To Next Page
Loading...
