12
ENG
WATCHING TV
WATCHING TV
Connecting to an antenna
Connect an antenna to watch TV referring to the
following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connecting an antenna
Connect the TV to a wall antenna socket with a
RF cable (75
).
Use a signal splitter to use more than 2
TVs.
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
If the image quality is poor with an
antenna connected, aim the antenna to
the proper direction.
An antenna cable and converter are not
supplied.
NOTE
4 When the basic settings are complete,
press OK.
For those countries without confirmed DTV broa-
dcasting standards, some DTV features might n-
ot work, depending on the DTV broadcasting en-
vironment.
To display images in the best quality for your ho-
me environment, select Home Use.
S
tore Demo is suitable for the retail environment.
If you select Store Demo , the previously custo-
mized settings will switch to the default settings
of Store Demo in 5 minutes.
NOTE
Turning the TV on for the
first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press POWER to turn the TV
on.
The Initial setting screen appears if you turn
the TV on for the first time.
3
Follow the on-screen instructions to customize
your TV settings according to your preferences.
You can also access Factory Reset by
accessing OPTION in the Home menu-
SETUP.
NOTE
Selects a country to display.
Country（city）
Mode Setting
Power Indicator
Auto Tuning
Scans and saves available
programmes automatically.
Selects Home Use for the
home environment.
Sets the power indicator.
(When you select Home Use
from Mode Setting)
If you do not complete the Initial setting, it will ap-
pear whenever the TV turns on.Disconnect the p-
ower cord from the power outlet when you do no-
t use the TV for a long period of time.
NOTE
Watching TV
1
In Standby mode, press POWER to turn the TV
on.
2
Press INPUT and select Antenna.
3
To turn the TV off, press POWER.
The TV switches to Standby mode.
To Next Page
Loading...
