To Next PageTo Next PageWhy does after-image appear on my LG 88BH7D-B.AUS Digital Signage?
If an after-image appears on your LG Digital Signage, and you've been using a fixed image for a long time, this may be due to pixel damage. Use the screen-saver function to prevent this. This can cause image sticking, which is normal for LCD screen products.
What to do if the screen image looks abnormal on LG Digital Signage?
If the screen image on your LG Digital Signage looks abnormal, check if the graphics card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu. Also, ensure the proper input signal is connected to the signal port using the correct signal cable. If you are trying to access the PC BIOS configuration screen and the 58:9 aspect ratio is not supported, connect a standard aspect ratio (4:3 or 16:9) monitor first, then perform the BIOS configuration.
Why does the audio function not work on my LG Digital Signage?
If the audio function does not work on your LG Digital Signage, verify the audio cable is connected properly. Adjust the volume and ensure the sound is set correctly. You may also want to select the appropriate equalizer sound and adjust the volume again.
Why does after-image appear on the LG 88BH7D-B.AUS Digital Signage?
If an after-image appears on your LG Digital Signage, and you've been using a fixed image for a long time, the pixels may be damaged. Use the screen-saver function to prevent this. Also, when a dark image is displayed after an image with high contrast (black and white or gray), image sticking may occur, which is normal for LCD screen products.
What to do if the operation does not work normally on LG Digital Signage?
If the operation of your LG Digital Signage does not work normally, check if the Timer is set. Also, verify the power control settings and check for any power interruptions.
Why does the 'Unknown Product' message appear when connecting LG Digital Signage?
If the 'Unknown Product' message appears when your LG Digital Signage is connected, check if the Plug and Play function is supported by referring to the graphics card user manual.
General| Brand | LG |
|---|---|
| Model | 88BH7D-B.AUS |
| Category | Digital Signage |
| Language | English |
