LG 915FT

Operation
On Screen Display(OSD) Selection and
Adjustment
OSD Adjust Description
To manually demagnetize the
screen which may show some
image or color incorrectly.
SPECIAL
DEGAUSS ON
RECALL ON
MOIRE H: 0/V: 0
CONVERGENCE H:50/V:50
PURITY :50
54.4kHz/60.0Hz
USER MODE
DEGAUSS
If the monitor is operating in a
factory preset mode, this control
will reset the image to the
factory preset mode.
RECALL
This item allows you to reduce
the moire (Moire is caused by
interference Horizontal Scan
Line with the periodical dot
screen). It is normally
OFF(H:0/V:0).
The moire adjustments may
affect the focus of the screen.
The screen image may shake
slightly while the moire
reduction function is on.
MOIRE
Use to adjust the alignment of
red and blue fields.
CONVERGENCE
Use to adjust the purity on the
screen if the color appears
uneven.
(1) Adjust the purity of the upper
left corner of the screen.
(2) Adjust the purity of the upper
right corner of the screen.
(3) Adjust the purity of the lower
left corner of the screen.
(4) Adjust the purity of the lower
right corner of the screen.
PURITY
OSD
SET
INPUT
INPUT
SET
OSD
SPECIAL
A16