To Next PageTo Next PageHow to fix the 'No Signal' message on my LG 915FT?
If you're seeing a 'NO SIGNAL' message on your LG Monitor, it could be due to a disconnected signal cable. Ensure the cable is securely connected. Alternatively, the frequency of the sync input might be outside the monitor's operating range. In this case, use your graphics board's utility software to adjust the frequency setting. Refer to your graphics board manual for specific instructions.
What to do if my LG 915FT Monitor is stuck in power saving mode?
If your LG Monitor is stuck in display power management mode, it could be due to a missing sync signal. Make sure the signal cable is securely fastened. Also, check both your computer's power and the configuration of your graphics adapter to ensure they are properly set up.
Why doesn't my LG 915FT Monitor enter power saving mode?
If your LG Monitor isn't entering power saving off mode (amber light), the computer video signal might not be VESA DPMS standard. This means either your PC or the video controller card isn't using the VESA DPMS power management function.
Why is the image on my LG 915FT Monitor not centered or the correct shape?
If the image on your LG Monitor isn't centered, is too small, or isn't a rectangular shape, it likely means the image hasn't been adjusted in the current operating mode. Use the OSD, SET, and buttons on your monitor to adjust the image settings to your preference.
Welcome message and overview of the monitor's capabilities.
Highlights essential monitor features like screen size, compatibility, and connectivity.
Essential safety guidelines for using the monitor to prevent hazards like shock or fire.
Guidelines for safe installation, cleaning, and repacking procedures.
Steps to connect the monitor to an IBM PC or compatible system.
Guide for connecting the monitor to an Apple Macintosh using an adapter.
Instructions for using BNC connectors with various video card types.
Explains how to use the monitor's integrated USB hub for peripherals.
Details technical specifications of the monitor's USB interface.
Guide to using software for controlling monitor settings via USB.
Identifies and explains the location and function of all monitor controls.
Explains the operation of each button on the monitor's control panel.
Guide to navigating and adjusting settings using the OSD menu.
Explains OSD options for Brightness, Contrast, Color, Position, Size, Shape, Setup, and Special functions.
Details EPA Energy Star and DPMS power saving features.
Information on MPR II low radiation standards and DDC data channel functionality.
Explains the monitor's preset and user-defined video memory modes.
Provides solutions for common display and power indicator issues.
Guidelines for when to refer servicing to qualified personnel.
Lists detailed specs like sync types, connectors, pin assignments, and input forms.
Lists detailed specs like picture tube, dimensions, power input, weight, and environmental conditions.
General
