41
MAINTENANCE
ENGLISH
4
Lift out the pre-filter
d
from the product body.
5
Use the combination tool
e
to clean any dust
off the motor.
• Do not wash the motor with water.
6
Clean filters by regularly brushing the dust off
and wash them in running water at least once
a month.
• To avoid odour and the malfunction of the
motor, allow the exhaust filter to dry
completely in a well-ventilated area out of
direct sunlight for at least 24 hours before
reassembling.
7
Align the lock position
f
of the exhaust filter
cover with the letter
"H"
g
of the
PUSH
button
on the exhaust filter.
8
Push and insert the exhaust filter cover
c
into
the exhaust filter
a
and rotate it to reassemble
it and prevent it from falling out.
9
Insert the dried pre-filter and rotate the
exhaust filter to the locked position
f
to
reassemble it on the product body.
Cleaning the Nozzles
Clean the nozzle and rotating brush regularly.
To Next Page
Loading...
Need help?
General
