Why is there no water coming out of the mop nozzle on my LG Vacuum Cleaner?
M
medinacaitlynSep 9, 2025
If your LG Vacuum Cleaner mop nozzle isn't dispensing water, first, ensure the water tank is filled. Remove the battery or detach the nozzle before filling the water tank. Make sure the water tank is properly attached to the mop nozzle. Remove the battery or detach the nozzle before properly securing the water tank to the nozzle. Also, check that the Water Adjustment button is not set to STOP; press the High or Low Water Adjustment button all the way down. Finally, check if the water outlet is clogged and use a sharp pin to remove any blockage.
M
Matthew DiazAug 22, 2025
How to fix an LG A9 Vacuum Cleaner that won't turn on?
T
Tony VelasquezAug 23, 2025
If your LG Vacuum Cleaner isn't turning on, make sure the battery isn't completely discharged by charging it. Also, verify that the appliance is actually turned on by pressing the Power button.
K
kshawAug 25, 2025
What to do if my LG A9 Vacuum Cleaner is not charging?
J
Joseph BeckerAug 25, 2025
If your LG Vacuum Cleaner isn't charging, ensure the power cord is securely plugged into the outlet. Also, check the charging terminals for any dirt or foreign objects and remove them with a dry cloth.
C
connorschwartzAug 26, 2025
Why is the suction power of my LG A9 Vacuum Cleaner too weak?
L
lori14Aug 27, 2025
If the suction power of your LG Vacuum Cleaner is weak, it might be due to several reasons. First, check if the dust bin is full and empty it if necessary. Clogged filters can also reduce suction, so clean both the pre-filter and the exhaust filter. Additionally, inspect the inlet and rotating brush for any obstructions like foreign objects, threads, or hair, and remove them. Check the extension pipe for blockages.
S
Stephen HornAug 27, 2025
Why is the suction power too weak on my LG A9?
D
Denise MartinezAug 27, 2025
If your LG Vacuum Cleaner's suction is weak, it might be due to a few reasons. First, empty the dust bin if it's full. Next, clean both the pre-filter and the exhaust filter, as they might be clogged. Also, check for any blockages in the inlet, and remove any obstructions from the rotating brush or the inlet port.
J
Jessica WoodsAug 29, 2025
How to turn on LG A9 Vacuum Cleaner?
L
Laura MoralesAug 29, 2025
If your LG Vacuum Cleaner is not turning on, ensure that the battery is charged. If the battery is fully discharged, charge the battery. Also, make sure the appliance is powered on by pressing the Power button.
J
jenkinsronaldSep 18, 2025
What to do if the Kompressor lever on my LG Vacuum Cleaner does not return?
A
angelafosterSep 18, 2025
If the Kompressor lever on your LG Vacuum Cleaner isn't returning, it might be because foreign objects are stuck in the cyclonic mesh filter. Remove the cyclonic mesh filter and clean it using the provided cleaning brush.
K
kevin62Sep 18, 2025
Why does my LG Vacuum Cleaner smell bad?
A
Abigail GriffinSep 18, 2025
If you notice a strange odor coming from your LG Vacuum Cleaner, here are a few possible reasons:
* If the appliance is new (within the last 3 months), it may emit a rubber smell that should dissipate over time.
* The dust bin might be full; empty and clean it.
* The pre-filter or exhaust filter might need cleaning; clean them regularly.
* The pre-filter or exhaust filter might have been installed while damp; wash and allow them to dry completely (at least 24 hours in a well-ventilated area, out of direct sunlight) before reassembling.
* The dust inlet of the mop nozzle might need cleaning; wipe it with a wet wipe after each use.
A
Adam GrahamSep 7, 2025
Why is my LG A9 Vacuum Cleaner so loud?
M
Melanie GloverSep 7, 2025
If your LG Vacuum Cleaner is making too much noise, it might be running in Turbo mode. The motor may be louder at higher suction power settings, which is normal.
K
Katie RossSep 4, 2025
Why is the brush not spinning on my LG A9 Vacuum Cleaner?
R
Ryan HollandSep 4, 2025
If the rotating brush on your LG Vacuum Cleaner is not rotating, first, remove the brush, clean it if necessary, and reattach it. Also, check for any foreign objects on the rotating brush and remove them.